2D Electrical Resistivity Tomography an advance and expeditious exploration technique for current challenges to mineral industry
Keywords:
Mineral exploration, 2D electrical resistivity imaging, Drilling, Geochemical, GeophysicalAbstract
The rapid urbanization and industrialization are spurring a rising demand for building materials, base metals, and industrial minerals. This causes the need of increasing exploration activities of greenfield mineral deposit. While, in contrary mining industry in recent years discover fewer greenfield deposit, due to the high costs of traditional exploration (drilling and trenching) methods and low success rate in discovery of the mineable deposit. Whereas, the substantial growth in demand for mineral commodities increased the need for more new discoveries. To this end, innovations in exploration strategies are required. This paper attempts and overview of available techniques (drilling, geochemical and geophysical) for evaluation of mineral deposits, focusing on fundamental principles, and the advantages and disadvantages of each technique. The paper also presents a critical comparison of these exploration techniques, considering equipment cost, time required for data collection and interpretation and also the efficiency of deposit assessment of each method. The major advantages and disadvantages of the techniques presented is discussed in text and as well as tabulated. Finally, the future challenges in exploration are discussed and recommendations for alternative techniques is mooted.
References
Aboud, E., E. S. Selim and A. El Bishlawy (2011). "Contribution of gravity and magnetic data in delineating the subsurface structure of Hammam Faroun area, Gulf of Suez, Egypt." Arabian Journal of Geosciences 4(1): 249-257.
Abu-Zeid, N., G. Bianchini, G. Santarato and C. Vaccaro (2004). "Geochemical characterisation and geophysical mapping of Landfill leachates: the Marozzo canal case study (NE Italy)." Environmental Geology 45(4): 439-447.
Al-Anezi, G. T., A. M. Al-Amri and H. Zaman (2012). "Investigation of the weathering layer using seismic refraction and high- resolution seismic reflection methods, NE of Riyadh city." Arabian Journal of Geosciences 5(6): 1347-1358.
Ali, H. and R. Whiteley (1981). "Gravity exploration for groundwater in the Bara Basin, Sudan." Geoexploration, 19(2), 127-141.
Alsadi, H. N. and E. N. Baban (2014). "GRAVITY EXPLORATION METHOD."
Auken, E., L. Pellerin, N. B. Christensen and K. Sørensen (2006). "A survey of current trends in near-surface electrical and electromagnetic methods." Geophysics 71(5): G249-G260.
Baines, D., D. G. Smith, D. G. Froese, P. Bauman and G. Nimeck (2002). "Electrical resistivity ground imaging (ERGI): a new tool for mapping the lithology and geometry of channel‐belts and valley‐fills." Sedimentology 49(3): 441-449.
Bayrak, M. and L. Şenel (2012). "Two- dimensional resistivity imaging in the Kestelek boron area by VLF and DC resistivity methods." Journal of Applied Geophysics 82: 1-10.
Bentley, L. R. and M. Gharibi (2004). "Two-and three-dimensional electrical resistivity imaging at a heterogeneous remediation site." Geophysics 69(3): 674-680.
Beresnev, I. A., C. E. Hruby and C. A. Davis (2002). "The use of multi-electrode resistivity imaging in gravel prospecting." Journal of Applied Geophysics 49(4): 245- 254.
Bevan, B. W. (1998). "Geophysical exploration for archaeology: An introduction to geophysical exploration."
Bi, B. (2009). "The application of the electric method to bauxite exploration. "Geophysical and Geochemical Exploration 33(4): 400-402.
Boyle, R. and R. Garrett (1970). "Geochemical prospecting—a review of its status and future." Earth-Science Reviews 6(1): 51-75.
Cardimona, S. (2002). "Electrical resistivity techniques for subsurface investigation." Department of Geophysics, university of Missouri Rolla-Mo.
Carmichael, R. S. and G. Henry Jr (1977). "Gravity exploration for groundwater and bedrock topography in glaciated areas." Geophysics 42(4): 850-859.
Cassiani, G., V. Bruno, A. Villa, N. Fusi and A. M. Binley (2006). "A saline trace test monitored via time-lapse surface electrical resistivity tomography." Journal of Applied Geophysics 59(3): 244-259.
Chambers, J., P. Wilkinson, D. Wardrop, A. Hameed, I. Hill, C. Jeffrey, M. Loke, P. Meldrum, O. Kuras and M. Cave (2012). "Bedrock detection beneath river terrace deposits using three-dimensional electrical resistivity tomography." Geomorphology 177: 17-25.
Cheng, L., R. Smith, M. Allard, P. Keating, M. Chouteau, J. Lemieux, M. Vallée, D. Bois and D. Fountain (2009). "Evaluation of the efficiency of several air borne electromagnetic systems: exploration implications." Exploration and Mining Geology 18(1-4): 1-12.
Clark, D. (1983). "Comments on magnetic petrophysics." Exploration Geophysics 14(2): 49-62.
Coal, E. (2011). "Exploration Drilling." 1-2. Dahlin, T. (1996). "2D resistivity surveying for environmental and engineering applications." First break 14(7): 275-283.
Davydycheva, S., N. Rykhlinski and P. Legeido (2006). "Electrical-prospecting method for hydrocarbon search using the induced- polarization effect." Geophysics 71(4): G179-G189.
Eaton, e. a. (2003). Hardrock seismic exploration, Society of Exploration Geophysicists. Eckhardt, E. A. (1940). "A brief history of the gravity method of prospecting for oil." Geophysics 5(3): 231-242.
Frederick D. Day-Lewis, C. D. J., Kamini Singha, and John W. Lane, Jr. "Best practice in Electrical Resistivity Imaging: Data collection and processing, and application to data from corinna, MAINE." An administrative report for EPA region: 227.
Gough, D. I. (1992). "Electromagnetic exploration for fluids in the Earth's crust." Earth-Science Reviews 32(1-2): 3-18.
Govett, G. J. S. (2013). Rock geochemistry in mineral exploration, Elsevier.
Griffiths, D. and R. Barker (1994). "Electrical imaging in archaeology." Journal of Archaeological Science 21(2): 153-158.
GWA "Code of practice,Mineral exploration drilling." 1-68. Heller, M. E. (1993). Exploration-sampling drilling system, Google Patents.
Hinze (2013). Gravity and magnetic exploration: Principles, practices, and applications, Cambridge University Press.
Hinze, W. J. (1990). The role of gravity and magnetic methods in engineering and environmental studies. Geotechnical an Environmental Geophysics: Volume I: Review and Tutorial, Society of Exploration Geophysicists: 75-126.
Hinze, W. J., R. R. Von Frese, R. Von Frese and A. H. Saad (2013). Gravity and magnetic exploration: Principles, practices, and applications, Cambridge University Press.
Junaid, M., R. A. Abdullah, R. Saa'ri, M. Alel, W. Ali and A. Ullah (2019). "Recognition of boulder in granite deposit using integrated borehole and 2D electrical resistivity imaging for effective mine planning and development."
Kana, J. D., N. Djongyang, D. Raïdandi, P. N. Nouck and A. Dadjé (2015). "A review of geophysical methods for geothermal exploration. "Renewable and Sustainable Energy Reviews 44: 87-95.
Karaaslan, H. and C. Karavul (2018). "Usefulness of electrical and magnetic methods in finding buried structure of the Alabanda Ancient Cistern in Çine Town, Aydın City, Turkey." Arabian Journal of Geosciences 11(8): 178.
Karlık, G. and M. A. Kaya (2001). “Investigation of groundwater contamination using electric and electromagnetic methods at an open waste-disposal site: a case study from Isparta, Turkey." Environmental Geology 40(6): 725-731.
Kearey, P., M. Brooks and I. Hill (2013). An introduction to geophysical exploration, John Wiley & Sons.
Khan, M. R., S. S. Bilali, F. Hameed, A. Rabnawaz, S. Mustafa, N. Azad, M. Basharat and A. Niaz (2018). "Application of gravity and magnetic methods for the crustal study and delineating associated ores in the western limb of Hazara Kashmir Syntaxis, Northwest Himalayas, Pakistan." Arabian Journal of Geosciences 11(6): 131.
Kreuzer, O. (2007). Risk modelling–increasing the effectiveness of our exploration investments. Proceedings Kalgoorlie 07 Conference. LANGE, A. S. G. "Seismic Methods." Environmental geology 4(Geophysics): 1-66.
Lapenna, V., P. Lorenzo, A. Perrone, S. Piscitelli, E. Rizzo and F. Sdao (2005). "2D electrical resistivity imaging of some complex landslides in Lucanian Apennine chain, southern Italy." Geophysics 70(3): B11-B18.
Leaman, D. E. (1973). "Applied geophysics in Tasmania: Part 2. Use, effectiveness and reliability of methods." Exploration Geophysics 4(3): 59-77.
Lelièvre, P. G., C. G. Farquharson and C. A. Hurich (2012). "Joint inversion of seismic traveltimes and gravity data on unstructured grids with application to mineral exploration." Geophysics 77(1): K1-K15.
Loke, M. (1999). "Electrical imaging surveys for environmental and engineering studies." A practical guide to 2.
Lucius, J. E., W. H. Langer and K. Ellefsen (2007). An introduction to using surface geophysics to characterize sand and gravel deposits, US Geological Survey.
Ma et al. (2016). "Overview on vertical and directional drilling technologies for the exploration and exploitation of deep petroleum resources." Geomechanics and Geophysics for Geo-Energy and Geo-Resources 2(4): 365-395.
Macnae, J. (1995). "Applications of geophysics for the detection and exploration of kimberlites and lamproites." Journal of Geochemical Exploration 53(1-3): 213- 243.
Maganti, D. (2008). Subsurface investigations using high resolution resistivity, The University of Texas at Arlington.
Mariita, N. O. (2007). The gravity method, United nation university: 9.
Marjoribanks, R. (2010). Geological methods in mineral exploration and mining, Springer Science & Business Media. McClenaghan, M. B. (2011). "Overview of common processing methods for recovery of indicator minerals from sediment and bedrock in mineral exploration. "Geochemistry: Exploration, Environment, Analysis 11(4): 265-278.
Meju, M. A. (2002). "Geoelectromagnetic Exploration For Natural Resources: Models, Case Studies And Challenges." Surveys in Geophysics 23(2): 133-206.
Milkereit, B., E. Berrer, A. R. King, A. H. Watts, B. Roberts, E. Adam, D. W. Eaton, J. Wu and M. H. Salisbury (2000). "Development of 3-D seismic exploration technology for deep nickel- copper deposits—A case history from the Sudbury basin, Canada." Geophysics 65(6): 1890-1899.
Minings, S. M. A. (2016). "World Exploration Trends 2016." 1-12.
Minnesota, M. (2014). "Exploration Drilling Best Managment Practice." 1-24.
Mojica, A., T. Pérez, J. Toral, R. Miranda, P. Franceschi, C. Calderón and F. Vergara (2017). "Shallow electrical resistivity imaging of the Limón fault, Chagres River Watershed, Panama Canal." Journal of Applied Geophysics 138: 135- 142.
Papadopoulos, N., A. Sarris, M.-J. Yi and J.-H. Kim (2009). "Urban archaeological investigations using surface 3D ground penetrating radar and electrical resistivity tomography methods." Exploration Geophysics 40(1): 56-68.
Phengnaone, K., R. Arjwech and M. Everett (2020). "2D electrical resistivity tomography (ERT) method to delineate coal seams: Case studies on lignite and anthracite." Songklanakarin Journal of Science & Technology 42(4).
Philp, R. and P. Crisp (1982). "Surface geochemical methods used for oil and gas prospecting—a review." Journal of Geochemical Exploration 17(1): 1-34.
Pit Hil, V. B., Vicki Langenheim (1997). "Introduction To Gravity." USGS: 1-2.
Ramazi, H., M. R. H. Nejad and A. A. Firoozi (2009). "Application of integrated geoelectrical methods in Khenadarreh (Arak, Iran) graphite deposit exploration." Journal of the Geological Society of India 74(2): 260-266.
Reynolds, J. M. (2011). An introduction to applied and environmental geophysics, John Wiley & Sons.
Robineau, B., J. Join, A. Beauvais, J.-C. Parisot and C. Savin (2007). "Geoelectrical imaging of a thick regolith developed on ultramafic rocks: ground water influence." Australian Journal of Earth Sciences 54(5): 773-781.
Robinson, E. S. (1988). "Basic exploration geophysics." Rucker, D. F., N. Crook, D. Glaser and M. H. Loke (2012). "Pilot‐scale field validation of the long electrode electrical resistivity tomography method." Geophysical Prospecting 60(6): 1150-1166.
Salisbury, M. and D. Snyder (2007). "Application of seismic methods to mineral exploration." Mineral deposits of Canada: A synthesis of major deposit types, district metallogeny, the evolution of geological provinces, and exploration methods: Geological Association of Canada, Mineral Deposits Division, Special Publication 5: 971-982.
Salisbury, M. H., B. Milkereit, G. Ascough, R. Adair, L. Matthews, D. R. Schmitt, J. Mwenifumbo, D. W. Eaton and J. Wu (2000). "Physical properties and seismic imaging of massive sulfides." Geophysics 65(6): 1882-1889.
Samouelian, A., I. Cousin, A. Tabbagh, A. Bruand and G. Richard (2005). "Electrical resistivity survey in soil science: a review." Soil & Tillage Research 83(2): 173-193.
Schodde, R. (2003). Long term trends in exploration and the likely future of the Australian Exploration Industry. Australasian Institute of Mining and Metallurgy Technical Meeting, Melbourne./http://www. wmc. com. au/pubpres/index. htm.
Scott, W. and P. Eng (2014). "Geophysics for mineral exploration."
Sengbush, R. L. (2012). Seismic exploration methods, Springer Science & Business Media.
Sharma, P. (1987). "Magnetic method applied to mineral exploration." Ore Geology Reviews 2(4): 323-357.
Sheriff, R. E. (2002). Encyclopedic dictionary of applied geophysics, Society of exploration geophysicists.
Singh, K., K. Singh, R. Lokhande and A. Prakash (2004). "Multi electrode resistivity imaging technique for the study of coal seam.”
Spies, B. R. (1989). "Depth of investigation in electromagnetic sounding methods.” Geophysics 54(7): 872-888.
Survey, B. G. (2012). "World Mineral Production." 1-126.
Survey, B. G. (2015). "World Mineral Production." 1-96.
Tejero, R., D. Gomez-Ortiz, G. G. Heydt, F. M. Toledo, C. M. C. Martínez, M. D. M. S. Rodriguez and J. J. Q. Suarez (2017). "Electrical resistivity imaging of the shallow structures of an intraplate basin: The Guadiana Basin (SW Spain)." Journal of Applied Geophysics 139: 54- 64.
Telford, W. M., W. Telford, L. Geldart and R. E. Sheriff (1990). Applied geophysics, Cambridge university press.
Thomas, E. A. (2016). "Exploration geophysics for intrusion‐hosted rare metals." Geophysical Prospecting 64(5): 1275- 1304.
Van Overmeeren, R. A. (1981). "A combination of electrical resistivity, seismic refraction, and gravity measurements for groundwater exploration in Sudan." Geophysics 46(9): 1304-1313.
Van Schoor, M. (2002). "Detection of sinkholes using 2D electrical resistivity imaging." Journal of Applied Geophysics 50(4): 393-399. Weller, C. (1974). Seismic exploration method, Google Patents.
West, G. and J. Macnae (1991). Physics of the electromagnetic induction exploration method. Electromagnetic Methods in Applied Geophysics: Volume 2, Application, Parts A and B, Society of Exploration Geophysicists: 5-46.
Wilburn, D. and M. Bourget (2010). Exploration review Mining Engineering 62(5): 39.
Xiang, J., J. Chen, G. Sofia, Y. Tian and P. Tarolli (2018). Open-pit mine geomorphic changes analysis using multi-temporal UAV survey. Environmental earth sciences 77(6): 220.
Yassonov, P. and N. Nurgalieva (2013). Magnetic susceptibility, remanent magnetization and coercivity variations along soil profile.
Yeh, T. C. J., S. Liu, R. J. Glass, K. Baker, J. R. Brainard, D. Alumbaugh and D. LaBrecque (2002). A geostatistically based inverse model for electrical resistivity surveys and its applications to vadose zone hydrology. Water Resources Research 38(12).
